J1772 EV Charging Inlet Port Vehicle Socket Type 1 Connector 50 AMP Charging Level 1,2

3D STEP File

The J1772 electric vehicle charging socket enables you to charge your vehicle with level 1 and 2 charging. It is rated for 50 amps and comes with all the pins and a moisture/dust cap to reduce the likelihood of debris getting inside.

Size of wires required for pins
Lead (L) (8 AWG)
Neutral (N) (8 AWG)
Ground (PE) (8 AWG)
Control Pilot (CP) (16 AWG)
Proximity (PP) (16 AWG)

For this socket to work with public charging stations, you will need another device to communicate with the charging station. There are a few BMS that have this built in, but another option is using an AVC2 or AVC2.r. The difference between these two devices is that the AVC2.r has a 2.74K ohms 1/2 watt resistor between GND and PROX, and the AVC2 does not have that resistor.

Tools needed to assemble J1772 socket
8 mm Socket
3 mm Allen Key
T10 Screwdriver
Philips Head Screwdriver

Write a review

Note: HTML is not translated!
    Bad           Good

J1772 EV Charging Inlet Port Vehicle Socket Type 1 Connector 50 AMP

  • Brand: Duosida
  • Product Code: J177250A
  • Availability: In Stock
  • $65.00


Related Products

J1772 Active Vehicle Control Module AVC2

J1772 Active Vehicle Control Module AVC2

J1772 Active Vehicle Control Module AVC2Troubleshooting Manual and Wiring Diagram3D STEP FileThis co..

$48.00

J1772 Active Vehicle Control Module AVC2.r

J1772 Active Vehicle Control Module AVC2.r

J1772 Active Vehicle Control Module AVC2.rTroubleshooting Manual and Wiring Diagram3D STEP FileTh..

$50.00

J1772 Socket 50A Replacement Pins Set

J1772 Socket 50A Replacement Pins Set

J1772 Socket 50A Replacement Pins Set NewThese replacement pins are needed if you damage your existi..

$40.00