Toyota Prius Throttle Pedal Plug

This product is perfect if you want to use the Toyota Prius throttle pedal on your EV conversion and don't have the plug or need to replace this connector on your vehicle. The product comes with the necessary pins and pin seals as shown in the photo. The plug is for the Toyota Prius Pedal (78120-47050). The connector manufacturer number is 90980-11858. 

Pin 6 – Wiper 1
Pin 5 – Ground
Pin 4 – 5v +
Pin 3 – Wiper 2
Pin 2 – Ground
Pin 1 – 5v +

For most conversions with a standard 3-wire system, you only need to use the three pins 4, 5, and 6.

For the standard Curtis controller, the low volts is 0.8V and the high volts is 3.6V